Pneumatic planters — ACTION

Pneumatic seed drills are an absolutely necessary tool for every serious household that grows agricultural crops such as corn, sunflower, soybeans, oilseed rape and other popular crops. The already proven adjustment and operation system also characterizes this planter, which can significantly improve an operation that cannot be repeated. It is pneumatic because it uses a turbine that is powered by a gimbal to provide thrust for the seeder where the seed plate can "catch" each seed and insert it into the tunnel where each seed will fall at the desired spacing and depth. The complete adjustment system is very similar to the gearbox on any bicycle, and should be viewed as such. The factory and the manufacturer have implemented some standard setting tables that we can be guided by, but this does not prevent us from experimenting. So, this planter gets its drive from the wheel and transmits it through the chain and axles all the way to the gearbox where the planting of the plants in the ground is done, the system is quite simple. The entire transmission from the gearbox to the device itself implements the set parameters, and we can also turn off the drive on an individual section by turning off the gimbal of the section itself.

Cultures also differ in the distance between the rows, and what this seeder excels at is the hydraulic adjustment of that distance, which additionally saves time, which is of crucial importance for sowing, as we are chasing ideal conditions and are limited by time. With the replacement of the seed plates, the adjustment of the distance between the rows and between the seeds, this operation has been reduced from several hours to just a few minutes, in our experience no more than 7. We have all seen the pit stop of formula 1, so it is with this machine, you will literally feel as if you are in a pit stop and ready for the next crop, which no other provides.

The pressure and sowing depth are adjusted manually by correcting the position of the spring and winding the wheel stops. The desired depth will be implemented on the entire plot, regardless of whether it is harder or softer soil, so germination will be uniform, and we know how important this is for plant development. What's current lately is the concept of direct sowing and no-till systems, as well as cover crop - cover crops, which at the end of the day is just a "concept", and you don't need any "special" seeder, and we proved that this one can perform the same operation without any defects thanks to plastic disc openers that can cope with the most difficult conditions.

If you want a machine that will be an indispensable main player, you are in the right place.